OC5B Oxygen Concentrator, 5L, home care hospital

Description

OC5B Oxygen Concentrator, 5L, home care hospital

OC5B Oxygen Concentrator consisted of air compressor, adsorption tower of molecular sieve, sensor and flowrate controller. With the molecular sieve to be absorbent, the machine adopts PSA (pressure swing absorbers) method to directly concentrate medical oxygen with high concentration from the air.

It is small and mobile. The machine takes the advantages of small in volume, light in weight, convenient in moving (as it has turning truckle), stable in performance, high in safety, easy in operating, low in noise, safe in working, which complies with requirements of medical device.

The machine has a wide application, including clinic, hospital, oxygen bar, plateau outpost, gym center, etc.

Function
1) With working indicator.
2) Built-in filters to pure the gas.
3) Oxygen concentration status indicator.
4) Function of accumulating time.
5) Function of timing shutdown.
6) Alarm for power failure.
7) Alarm for high/low pressure protection.
8) Alarm for low flowrate.
9) Alarm for high temperature.

Performance
Maximum flowrate recommended: 5L/min.
Oxygen Output Concentration Levels: (reach the stated oxygen concentration level within 30 minutes after turning on the machine): 93%±3% at the flowrate of 0.5~3L/min.
Flowrate range: 0.5~5L/min.
Flowrate change at maximum recommended flowrate with 7 kPa back pressure: <0.5L/min.
Outlet pressure: 20kPa~50kPa.
Input Power Consumption: 400VA.
Electrical Requirements: AC220V±10%, 50Hz±1Hz.
Operating noise: ≤55dB(A).

SpO2 Measurement
1) Range: 0%~100%.
2) Accuracy: ±2% when SpO2 is in range of 70%~100%; unspecified when less than 70%.

Pulse rate Measurement
1) Range: 30bpm~250bpm.
2) Accuracy: ±2bpm or ±2%, whichever is greater.

Safety categories
1) Type of protection against electroshock: class II equipment.
2) Degree of protection against electroshock: Type BF applied part.
3) Degree of protection against ingress of water: IP21.

Accessories
Humidifier bottle.
User manual.
Power cord.
Nasal cannula.

Physical characteristic
Dimension: 508mm(L) × 260mm(W) × 530mm(H).
Weigh: 21Kg.

Environment
a) Temperature: 10℃~40℃.
b) Relative humidity: ≤80%.
c) Atmospheric pressure: 860hPa~1060hPa.